Professional LED Video Wall Installation & Display Solutions

Yes. We offer professional LED installation services for commercial, industrial, and residential spaces, tailored to each project’s requirements, layout, and usage needs.

Project timelines vary by size and complexity. Most installations are completed efficiently with minimal disruption after an initial site assessment and clear project planning.

Yes. LED systems consume less energy, require minimal maintenance, and have longer lifespans, resulting in significant savings on electricity and replacement costs over time.

Pixel pitch is the distance (in millimeters) between the center of one LED pixel and the next.

• The Rule: The smaller the pitch, the higher the resolution and the closer you can stand to the screen without seeing individual dots.
• 2026 Standard: For boardrooms, look for P1.2 to P1.8. For large lobbies or stages, P2.5 to P4 is usually the sweet spot.

No. Outdoor walls require high IP ratings (usually IP65) to handle rain and dust, and they need much higher brightness (3,000+ nits) to compete with direct sunlight. An indoor wall will wash out in daylight and likely short-circuit at the first sign of humidity.

Most high-quality LED walls are rated for 100,000 hours (about 11 years of 24/7 use). However, “lifespan” usually refers to the time it takes for the screen to reach 50% of its original brightness. With proper maintenance, they often remain commercially viable for 7–10 years.

• Front Serviceable: Panels pop out from the front using a vacuum tool. Essential for walls mounted directly against a building surface.
• Rear Serviceable: Requires 2–3 feet of clearance behind the wall for technicians to work. Common in touring/rental setups and large outdoor billboards.

This is caused by a low Refresh Rate. If you plan to record your screen (or have guests take photos), you need a refresh rate of at least 3,840Hz. In 2026, high-end studio walls are pushing 7,680Hz for crystal-clear broadcast quality.

LEDs generate heat. While modern panels are more efficient, a large-scale wall in a small room will raise the temperature. You should always factor in BTU output when planning your room’s HVAC to avoid “thermal drift,” which can cause color shifting.